Free tool
BPM Calculator
Tap a tempo or type one. Get the beat in milliseconds and hertz, every note division for a delay time, bar and phrase lengths, a bar count as SMPTE timecode, and the rate to set a strobe or a chase to.
Runs entirely in your browser. The URL updates as you work, so a result can be sent as a link.
Tempo
Type the BPM, or tap it out along with the track. Everything below follows.
Tap the button on each beat, or press T. The last 8 intervals are averaged, and a two-second pause starts a new count.
BPM to milliseconds and hertz
BPM counts quarter notes, so one beat here is a quarter note. A bar of 4/4 is 4 of them.
- One beat
- 468.75 ms
- Beats per second
- 2.1333 Hz
- One bar of 4/4
- 1.875 s
- Bars per minute
- 32
| Note | Straight | Dotted | Triplet |
|---|---|---|---|
| 1/1 | 1875 | 2812.5 | 1250 |
| 1/2 | 937.5 | 1406.25 | 625 |
| 1/4 | 468.75 | 703.13 | 312.5 |
| 1/8 | 234.38 | 351.56 | 156.25 |
| 1/16 | 117.19 | 175.78 | 78.13 |
| 1/32 | 58.59 | 87.89 | 39.06 |
| Bars | Beats | Seconds | min:sec |
|---|---|---|---|
| 1 | 4 | 1.875 | 0:01.875 |
| 4 | 16 | 7.5 | 0:07.500 |
| 8 | 32 | 15 | 0:15 |
| 16 | 64 | 30 | 0:30 |
| 32 | 128 | 60 | 1:00 |
Bars to timecode
Where a bar line falls as SMPTE timecode, counting from 00:00:00:00 at the first downbeat.
- Timecode after 16 bars
- 00:00:30:00
- Duration
- 30 s
- 0:30
- Frames
- 750
- Nearest whole frame
25 fps (PAL / EBU) — The European broadcast and theatre standard. Timecode equals wall clock exactly.
If your timeline starts at 01:00:00:00, add the hour.
Convert the result to another frame rateStrobe and chase rate
The rate that puts a strobe or a chase step on a note division, and the tempo a given rate belongs to.
- 1/16 at 128 BPM
- 8.533 Hz
- One every 117.19 ms.
- 10 Hz as 1/16
- 150 BPM
- The tempo at which that rate lands on this division.
You set 128 BPM by hand. CueSync reads the tempo from the decks or from the audio file itself, and fires a cue on a chosen beat, every few bars or at a phrase change. With a free account you can run the demo show and tour the app in read-only mode.
Download CueSync with a free accountCommon show tempos at a glance
Delay times, sixteenth-note strobe/chase rates and 16-bar phrase durations in 4/4 across standard live-event tempos.
| Tempo | Quarter (1/4) | Dotted 1/8 | 16th chase rate | 16 bars (4/4) |
|---|---|---|---|---|
| 90 BPM | 666.67 ms | 500.00 ms | 6.00 Hz | 0:42.667 |
| 110 BPM | 545.45 ms | 409.09 ms | 7.33 Hz | 0:34.909 |
| 120 BPM | 500.00 ms | 375.00 ms | 8.00 Hz | 0:32 |
| 124 BPM | 483.87 ms | 362.90 ms | 8.27 Hz | 0:30.968 |
| 128 BPM | 468.75 ms | 351.56 ms | 8.53 Hz | 0:30 |
| 135 BPM | 444.44 ms | 333.33 ms | 9.00 Hz | 0:28.444 |
| 140 BPM | 428.57 ms | 321.43 ms | 9.33 Hz | 0:27.429 |
| 150 BPM | 400.00 ms | 300.00 ms | 10.00 Hz | 0:25.600 |
| 174 BPM | 344.83 ms | 258.62 ms | 11.60 Hz | 0:22.069 |
Tempo questions, answered
- How do I convert BPM to milliseconds?
- Divide 60,000 by the BPM: the result is the length of one beat in milliseconds. At 120 BPM a beat is 500 ms; at 128 BPM it is 468.75 ms. Halve it for an eighth note and quarter it for a sixteenth, multiply by 1.5 for a dotted note and by two thirds for a triplet.
- How long is 16 bars at 128 BPM?
- 30 seconds, in 4/4. A bar of 4/4 is four beats, which at 128 BPM is 1.875 seconds, so 16 bars are 30 seconds and 32 bars are exactly one minute. For any tempo: bars × beats per bar × 60 ÷ BPM.
- How do I convert BPM to Hz for a strobe or a chase?
- Divide the BPM by 60 to get beats per second, then multiply by the notes per beat. 120 BPM is 2 Hz on the beat, 4 Hz on eighths and 8 Hz on sixteenths; sixteenths at 128 BPM are 8.53 Hz. Going the other way, a strobe at 10 Hz is flashing sixteenths at 150 BPM.
- What delay time matches a tempo?
- A note division of the beat: the beat itself, half of it, or the dotted eighth, which is three quarters of a beat. At 128 BPM those are 468.75 ms, 234.38 ms and 351.56 ms. The table on this page lists every division from a whole note to a thirty-second, straight, dotted and triplet.
- How accurate is tap tempo?
- Within about one BPM once you have tapped eight or nine beats, which is enough to set a chase by hand. A single tap 20 ms late reads about 5 BPM slow at 128 BPM; averaged over eight intervals the same slip costs under 1 BPM. It will not hold a beat grid across a whole track, which is why decks and analysis software report tempo to two decimals.
From a tempo to a show
A BPM is one number. A beat grid says where every beat and bar of a track falls, which is what a cue needs to land on.