Free tool
LTC Timecode Generator
Generate SMPTE linear timecode as a WAV file at 24 fps, 25 fps, 29.97 fps drop frame or 30 fps, from any start time, and download it. For a test signal, a rehearsal track, or a timecode source for a console that wants a clock on an audio input.
Runs entirely in your browser; nothing is uploaded. The URL updates as you work, so a setting can be sent to whoever is up the ladder as a link.
Timecode
Pick the frame rate and the time the file should start at. The first frame written is exactly the start time.
Length and sample rate
From one second to 60 minutes. Timecode that passes 23:59:59 continues from 00:00:00.
Your file
- First frame
- 01:00:00:00
- Last frame
- 01:09:59:24
- Frames
- 15,000
- File size
- 57.6 MB
- Mono, 16-bit WAV
The signal is written at about -3 dBFS, with no fades. Play the file back unprocessed: no normalising, effects or lossy compression, and feed it to the timecode input of the device that is chasing it. Everything is generated in this browser tab; nothing is uploaded.
CueSync generates timecode and chases it from the desk or the sound system, as LTC, MTC, Art-Net or TCNet. With a free account you can run the demo show and tour the app in read-only mode. Download for Mac, free account.
What is in each 80-bit frame
One LTC frame is 80 bits, sent bit 0 first as biphase-mark: a transition at every bit boundary and a second one mid-bit for a one.
| Bits | Field | Notes |
|---|---|---|
| 0-3 | Frame units | Binary-coded decimal, least significant bit first |
| 4-7, 12-15, 20-23, 28-31, 36-39, 44-47, 52-55, 60-63 | User bits | Eight groups of four; left at zero here |
| 8-9 | Frame tens | 0 to 2 |
| 10 | Drop-frame flag | 1 for 29.97 drop frame |
| 11 | Colour-frame flag | Clear |
| 16-19 | Second units | |
| 24-26 | Second tens | 0 to 5 |
| 32-35, 40-42 | Minute units and tens | |
| 48-51, 56-57 | Hour units and tens | 0 to 2 |
| 27 (59 at 25 fps) | Polarity correction | Set so the frame holds an even number of ones |
| 64-79 | Sync word | 0011 1111 1111 1101 |
LTC questions, answered
- What is LTC timecode?
- Linear timecode is SMPTE timecode carried as an audio signal. Each frame of the clock (hours, minutes, seconds, frames) is sent as 80 bits, encoded as a square wave, so it can be recorded to a track, played from a file or sent down an audio cable to any device with a timecode input.
- Which frame rate should I choose?
- The one the show was built at: the video, the cue list and the device reading the timecode all have to agree. 24 and 30 are common for film and some stage playback, 25 is the standard in much of the world's television, and 29.97 drop frame is the North American broadcast rate. A mismatch does not fail outright. The count slowly walks away from the clock instead.
- What does drop frame mean?
- 29.97 fps video runs a little slower than 30, so a count that numbers 30 frames every second falls behind the wall clock. Drop frame fixes the count by skipping the frame numbers 00 and 01 at the start of every minute except each tenth minute. No pictures are dropped, only numbers. The generator writes the drop-frame flag in every frame, and it will not start on a number that drop frame does not have, such as 00:01:00:00.
- How do I play the file?
- Play it from any audio player or playback system to the timecode input of the device that is chasing it, at a steady line level and without processing. Normalising, compression, equalisation and lossy formats such as MP3 can all blur the edges the reader looks for. If the reader needs a different level, change it on the output or the input, not in the file.
- Why do shows often start at 01:00:00:00?
- It leaves room before the show for a count-in or a pre-roll without the clock wrapping back from 00:00:00:00 to 23:59:59. Choose any start time you like. Timecode that runs past 23:59:59:29 continues from 00:00:00:00, and the generator does the same.
- How long can the file be?
- Up to 60 minutes. A 60-minute file at 48 kHz is a mono 16-bit WAV of about 346 MB, which is why the length is capped. For longer runs, generate a file that starts where the previous one stops.