Free tool
Show Network Planner
List the decks, consoles, media servers and nodes on your show network and pick an address range. Get a fixed IP table with no clashes, the ports each protocol needs, and a checklist to work through before the doors open.
Runs entirely in your browser and plans on paper: it does not scan or test your network. The URL updates as you work, so the plan can be sent as a link, a CSV or a printed sheet.
Your devices
Every device on the show network, with how many of each. Pick the product where it is one CueSync connects to.
Address scheme
One range for every fixed address. The host numbers below the first address are left for a router or a managed switch.
Traffic
What else runs on this network. Each choice adds its ports to the plan.
The plan
5 fixed addresses in 192.168.1.0/24, 6 port rows.
Addresses
| Address | Mask | Device | Note |
|---|---|---|---|
| 192.168.1.10 | 255.255.255.0 | CueSync computer | Needs an address in the network of every device it talks to. |
| 192.168.1.20 | 255.255.255.0 | Lighting console or console software (grandMA3) | |
| 192.168.1.30 | 255.255.255.0 | Media server (Resolume) | |
| 192.168.1.40 | 255.255.255.0 | Art-Net / sACN node 1 | Set on the node. Many ship on 2.x.x.x or 10.x.x.x. |
| 192.168.1.41 | 255.255.255.0 | Art-Net / sACN node 2 | Set on the node. Many ship on 2.x.x.x or 10.x.x.x. |
| From the DHCP pool | 255.255.255.0 | DJ deck on PRO DJ LINK 1 | Leases its address from the DHCP server on the cable. |
| From the DHCP pool | 255.255.255.0 | DJ deck on PRO DJ LINK 2 | Leases its address from the DHCP server on the cable. |
| From the DHCP pool | 255.255.255.0 | DJ deck on PRO DJ LINK 3 | Leases its address from the DHCP server on the cable. |
| From the DHCP pool | 255.255.255.0 | DJ deck on PRO DJ LINK 4 | Leases its address from the DHCP server on the cable. |
| From the DHCP pool | 255.255.255.0 | DJ mixer on PRO DJ LINK | Leases its address from the DHCP server on the cable. |
| 192.168.1.1 – 192.168.1.9 | Left free for a router or managed switch | ||
| 192.168.1.200 – 192.168.1.254 | DHCP pool (the only DHCP server on this network) | ||
Ports
| Protocol | Transport | Port | Between |
|---|---|---|---|
| Pioneer PRO DJ LINK | UDP | 50000–50002 | Decks, mixer and the CueSync computerDo not run rekordbox on the CueSync computer during a show: it claims these ports. |
| Art-Net (DMX) | UDP | 6454 | Console or CueSync computer → nodes |
| grandMA3 OSC | UDP (TCP on 2.3.x desks) | 8000 | CueSync computer → lighting console or console software |
| Resolume OSC | UDP | 7000 | CueSync computer → media server |
| Resolume web server | TCP (HTTP) | 8080 | CueSync computer → media servergrandMA3 onPC also uses TCP 8080. On one computer, move Arena's web server to another port. |
| Licence and update checks | HTTPS, outbound | HTTPS | CueSync computer → api.cuesync.live, downloads.cuesync.liveNot needed while a show runs. |
Checklist
- Cable the show network. Wired, not Wi-Fi, for show traffic, and Wi-Fi off on the show computers so none of them switches route mid-show.
- One network: every fixed address above starts the same way, in 192.168.1.0/24 with mask 255.255.255.0. A switch joins cables, not networks.
- Exactly one DHCP server on the cable, handing out only 192.168.1.200 – 192.168.1.254, so it never gives away a fixed address.
- Keep a busy DMX or pixel wall off the decks' cable: send it to each node's own address, or give the nodes their own adapter and switch.
- grandMA3 onPC and Resolume Arena both want TCP 8080. If they share a computer, move Arena's web server to another port.
- Keep audience and guest Wi-Fi off the show network, and switch any VPN off for the show: it is a network too.
- Every port listed below must be reachable between the devices named. A green light is not delivery: OSC and Art-Net are fire-and-forget, so check at the device.
A planning aid: it does not scan, ping or test your network. Check each address at the device.
CueSync follows the decks and drives the consoles, media servers and nodes on a plan like this, and its output editor warns when an output's address is on a network the computer is not on. With a free account you can run the demo show and tour the app in read-only mode. Download for Mac, free account.
Show protocol ports
The transport and port of each protocol the planner knows, as the CueSync manual gives them. Every one must be reachable between the devices that use it.
| Protocol | Transport | Port | Note |
|---|---|---|---|
| Pioneer PRO DJ LINK | UDP | 50000–50002 | Do not run rekordbox on the CueSync computer during a show: it claims these ports. |
| Art-Net (DMX) | UDP | 6454 | |
| sACN (E1.31) | UDP multicast 239.255.x.x, or unicast | 5568 | |
| Art-Net timecode | UDP | 6454 | |
| TCNet | UDP broadcast | 60000 | The discovery port. |
| OSC into CueSync | UDP | 9001 | Off until switched on in CueSync, and then open only to that computer until other devices are allowed. 9001 is the usual port. |
| grandMA3 OSC | UDP (TCP on 2.3.x desks) | 8000 | |
| grandMA2 Telnet | TCP (Telnet) | 30000 | |
| ETC Eos OSC | TCP | 3032 | |
| ChamSys MagicQ OSC | UDP | 6171 | |
| Avolites Titan WebAPI | TCP (HTTP) | 4430 | |
| Resolume OSC | UDP | 7000 | |
| Resolume web server | TCP (HTTP) | 8080 | grandMA3 onPC also uses TCP 8080. On one computer, move Arena's web server to another port. |
| disguise OSC | UDP | 3031 | |
| Pixera JSON-RPC | TCP | Set in Pixera | Pixera has no default port: use the one set in its API settings. |
| VIOSO | TCP | 9091 | |
| TouchDesigner OSC | UDP | 9000 | |
| QLab OSC | TCP or UDP | 53000 | |
| Pangolin BEYOND PangoScript | TCP | 16063 | Not 16062, which is Beyond's UDP port. |
| Unreal Engine OSC | UDP | 8001 | |
| Unreal plugin web remote | TCP (HTTP) | 8090 | Open in the editor by default, not in cooked builds. |
| Unreal plugin show link | TCP (WebSocket) | 8091 | Open when 8090 is. |
| Licence and update checks | HTTPS, outbound | HTTPS | Not needed while a show runs. |
Show networks, answered
- Which IP addresses should a show network use?
- Any one range that every device shares. Two devices on one switch talk to each other only when their addresses start the same way, for example both 192.168.1.x with the mask 255.255.255.0. 192.168.1.x and 10.0.0.x suit most rigs; Art-Net nodes often ship on 2.x.x.x or 10.x.x.x. Give the consoles, servers and nodes fixed addresses, and keep any DHCP pool clear of them.
- Do DJ decks on PRO DJ LINK need a fixed IP address?
- No. Players take an address from the DHCP server on the cable, and with none they usually give themselves a 169.254.x.x address. What matters is that the computer reading them has an address in the same network: keep a DHCP pool for the players, or give that computer a 169.254.x.x address as well.
- Do I need a managed switch for sACN?
- For multicast sACN on a shared switch, it helps. A basic unmanaged switch, one without IGMP snooping, delivers every multicast frame to every port, so every universe reaches every device. Use a managed switch with IGMP snooping and a querier, send sACN unicast to each node, or keep the nodes on their own switch.
- Which ports do Art-Net and sACN use?
- Art-Net uses UDP port 6454. sACN (E1.31) uses UDP port 5568, sent to a multicast group per universe, 239.255.<high byte>.<low byte> of the universe number, or unicast to the receiver's own address.
- Does this planner test my network?
- No. It plans addresses and ports on paper, in your browser, and nothing you type is sent anywhere. Check each address at the device before the doors open.
- Does CueSync tell me when an address is on the wrong network?
- Yes. CueSync's output editor shows a notice under the host field when the address is on a network the computer is not on, and a failed connection test says so first. It is advice, never a block: a router between two networks is a valid rig.