Free tool
Art-Net and sACN Universe Calculator
Convert between Art-Net Net, Sub-Net and Universe, the 15-bit port-address, and the sACN universe number, and get the sACN multicast address. Choose whether your console pairs the two with the same number or with sACN one higher.
Runs entirely in your browser. The URL updates as you work, so a setting can be sent to whoever is up the ladder as a link.
Numbering convention
Art-Net counts universes from 0 and sACN from 1. Consoles then pair the two in one of two ways. Pick the one your console uses.
Both protocols start at the first universe of the rig: Art-Net universe 0 and sACN universe 1 carry the same data.
Convert a universe
Type on either side. The Art-Net port-address, its Net, Sub-Net and Universe, and the sACN universe follow each other under the convention above.
- Art-Net port-address
- 0
- Net / Sub-Net / Universe 0/0/0
- sACN universe
- 1
- sACN multicast address
- 239.255.0.1
- UDP port 5568
- Port-address in hex
- 0x0000
- UDP port 6454
sACN multicast is sent to 239.255.<high byte>.<low byte> of the universe number. Unicast sACN goes to the receiver's own IP address and does not use the group.
These are the numbers an Art-Net or sACN output asks for. CueSync sends DMX over both, with sACN as multicast or unicast. With a free account you can run the demo show and tour the app in read-only mode. Download for Mac, free account.
How do Art-Net universes map to sACN universes?
A universe is the same 512 channels whether it travels as Art-Net or as sACN, so the mapping is only a matter of numbering. Art-Net counts from 0 and sACN counts from 1.
Consoles then pair the two in one of two ways. Some show the same number on both: Art-Net 1 and sACN 1, which leaves Art-Net 0 with no partner. Others put sACN one higher, so Art-Net 0 is sACN 1 and both protocols begin at the first universe of the rig. The standards do not choose between them. If every fixture answers one universe out, the two ends are using different conventions.
The ranges also differ. Art-Net's port-address is 15 bits and ends at 32,767. sACN runs from 1 to 63,999, so the higher sACN universes have no Art-Net number.
Landmark universes under both conventions
The same physical universe as an Art-Net port-address, as an sACN universe under each convention, and as the sACN multicast group (one-higher convention).
| Art-Net | Net / Sub-Net / Universe | sACN, same number | sACN, one higher | Multicast, one higher |
|---|---|---|---|---|
| Port-address 0 | 0/0/0 | none | 1 | 239.255.0.1 |
| Port-address 1 | 0/0/1 | 1 | 2 | 239.255.0.2 |
| Port-address 15 | 0/0/15 | 15 | 16 | 239.255.0.16 |
| Port-address 16 | 0/1/0 | 16 | 17 | 239.255.0.17 |
| Port-address 255 | 0/15/15 | 255 | 256 | 239.255.1.0 |
| Port-address 256 | 1/0/0 | 256 | 257 | 239.255.1.1 |
| Port-address 32767 | 127/15/15 | 32767 | 32768 | 239.255.128.0 |
Universe numbering questions, answered
- How do Art-Net universes map to sACN universes?
- One to one, with a shift in the numbering. Art-Net counts universes from 0 and sACN counts from 1, and each universe is the same 512 channels in both. Some consoles pair them with the same number (Art-Net 1 and sACN 1), others put sACN one higher (Art-Net 0 and sACN 1). Which one your console uses is a console setting or habit, not part of either standard.
- Is Art-Net universe 1 the same as sACN universe 1?
- Only if the console pairs them by the same number. Under the other convention, sACN universe 1 carries what Art-Net calls universe 0, and Art-Net universe 1 is sACN universe 2. Send one universe and see which fixtures answer: if they answer one universe out, the two ends use different conventions.
- How do I turn Net, Sub-Net and Universe into one number?
- Multiply the Net by 256, the Sub-Net by 16, and add the Universe. Net 1, Sub-Net 2, Universe 12 is 1 × 256 + 2 × 16 + 12 = 300. That 15-bit number is the Art-Net port-address, and it runs from 0 to 32,767. Under the one-higher convention it is sACN universe 301.
- What is the sACN multicast address for a universe?
- 239.255. followed by the universe as two bytes: the universe divided by 256, then the remainder. Universe 1 is 239.255.0.1, universe 256 is 239.255.1.0 and the last data universe, 63,999, is 239.255.249.255. sACN uses UDP port 5568. Unicast sACN is sent to the receiver's own IP address and does not use these groups.
- Why does an sACN universe sometimes have no Art-Net number?
- Art-Net's port-address is 15 bits, so it ends at 32,767, while sACN runs to 63,999. A universe above that range, such as sACN 40,000, cannot be addressed over Art-Net. At the other end, with the same number on both protocols, Art-Net 0 has no sACN partner because sACN has no universe 0.
Going deeper on DMX over IP
- Check whether CueSync drives your console and source
- DMX address calculator
- DMX universe planner
- sACN vs DMX
- DMX, Art-Net and sACN: which to use
- Art-Net explained
- CueSync's Art-Net / sACN output
Art-Net™ Designed by and Copyright Artistic Licence Engineering Ltd. CueSync is an independent product and is not affiliated with or endorsed by Artistic Licence.