Blog

Tagged Setup

20 articles on Setup.

Automating Avolites Titan Playbacks from the Music

Titan takes commands directly over its Web API: playbacks, cues, levels and macros, no middleware. What to map, and what belongs to the operator.

Read the full article

Guides4 min read

Music-Triggered Playbacks on ChamSys MagicQ

MagicQ's OSC surface takes playback activation and fader levels with no console-side scripting. What to send, and where the free PC version fits.

Guides5 min read

How to Chase External Timecode with a Cue Stack

Most guides cover generating timecode. Following someone else's is the harder half — locating, re-syncing, and deciding what happens when it stops.

Guides5 min read

How to Trigger ETC Eos Cues from the Music

Eos speaks OSC out of the box. The exact command surface, why the Go key is not a cue fire, and how to drive the desk from music without an operator.

Guides5 min read

How to Convert TCNet to SMPTE Timecode

TCNet carries deck position over UDP 60000, but no lighting console reads it. How to turn it into LTC, MTC or Art-Net timecode a desk can actually chase.

Guides4 min read

Where Should Your Show's Timecode Come From?

Reaper, QLab, the console's internal clock, a hardware generator, or the live performance itself. Four architectures, and how to pick between them.

Guides5 min read

Audio-Reactive Cues Over OSC: What QLab Can and Cannot Do

Reacting to live audio usually gets built from QLab network cues, OSC queries and patience. What that does, where it stops, and what analysis adds.

Guides8 min read

How to Send Timecode to grandMA3: LTC, MTC, Art-Net and TCNet

grandMA3 can follow SMPTE/LTC, MIDI timecode or Art-Net timecode. How each reaches the console, which to choose, and what happens when the source drops.

Guides6 min read

Resolume Arena + Timecode: Syncing Video to the Show Clock

How to combine Resolume Arena with CueSync timecode — SMPTE LTC, Ableton Link and drift protection.

Guides8 min read

Wedding DJ Lighting: 7 Presets to Build Once and Reuse (2026)

Seven wedding DJ lighting presets — ceremony, cocktail, dinner, first dance, open floor, bouquet, grand exit — to build once in CueSync and reuse.

Guides4 min read

CueSync for SoundSwitch Users: Setting Up a DJ Lighting Rig

Looking at SoundSwitch and CueSync? A step-by-step setup of CueSync for DJ lighting: the beat source, outputs, Looks, cues, Auto Pilot and a venue.

Guides4 min read

Best Art-Net / sACN Node for CueSync in 2026 (Buyer's Guide)

A 2026 buyer's guide to Art-Net and sACN nodes to pair with CueSync's DMX output: single- and multi-universe picks by use case.

Guides5 min read

How to Set Up an ENTTEC ODE Art-Net Node with CueSync

Step-by-step setup for the ENTTEC ODE (Open DMX Ethernet) node, the network route for getting DMX out of CueSync.

Guides5 min read

Pioneer DJ Auto-Sync for Lighting: CueSync + Pro DJ Link Setup (2026)

Auto-sync lighting and visuals to Pioneer CDJs in real time. CueSync reads PRO DJ LINK directly — BPM, beat phase and metadata, no bridge box. Setup guide.

Guides6 min read

What Is Art-Net? A 2026 Explainer for Lighting Engineers

Art-Net is an Ethernet protocol by Artistic Licence that carries DMX over UDP. Learn how it works, Art-Net 4 features, universes, and how CueSync uses it.

Guides9 min read

The Complete Guide to Stage Automation for DJs in 2026

Stage automation replaces manual cue stacks with audio-reactive lighting, visuals, and timecode. The full 2026 playbook for DJs and lighting designers.

Guides8 min read

Mobile DJ Lighting: The Complete 2026 Setup Guide

Everything you need to set up automated lighting for mobile DJ gigs — gear, software, venue profiles, and the one-laptop workflow with CueSync DJ Edition.

Guides3 min read

How to Sync Resolume to a DJ Set in Real Time (2026 Walkthrough)

Use CueSync to drive Resolume Arena clips, layers, and effects from live beat-event automation — no timecoding required.

Guides2 min read

DMX vs Art-Net vs sACN: Which Protocol Should You Use in 2026?

Understanding the three main lighting protocols and when to use each one for DJ and live event lighting automation.

Guides4 min read

How to Automate DJ Lighting with grandMA3 (2026 Guide)

Step-by-step guide to connecting CueSync to your grandMA3 console for beat-reactive lighting automation at clubs and festivals.