Guides7 min read
Build a Timecode Show From a Track: Cues a Console Chases
Turn one track into a beat-accurate timecode cue list: draft the cues, snap them to the beat, and give your console a show it chases.
CueSync TeamShow Control Engineers
A timecode show built from a track is a cue list in which every cue sits at a fixed position on that track's clock, so a lighting console that chases the clock fires the same cue on the same frame every night. Building one by hand means listening, stopping and typing positions for an afternoon. CueSync reads the track for you, drafts the cues on the music's own structure, lets you snap each one to the beat, and then hands the console either the cues or a cue list it runs from its own timecode. This guide walks that path from one audio file to a desk chasing the show.
What You Need
- A Mac with Apple Silicon running macOS 12 or later. There is no Windows build.
- CueSync Theatre, Production or the Show Editor plan. The timeline this guide uses is the Show Editor. A free account can run the demo show and tour the app in read-only mode. Building and saving your own shows, and connecting real outputs, need a paid plan. The desk file exports need a working licence too.
- The show's audio as a file.
- A console: grandMA3 (console or onPC, 2.3 to 2.5) for the full route below, or ChamSys MagicQ, Hog 4 or Avolites Titan for the file route.
DJ sets work differently. Generate Show in the DJ edition drafts cues that fire on the music, each on its own phrase of the track whenever it plays; it puts nothing on a clock. A timecode show is for a piece that runs the same way every night: an opener, a walk-on, a fixed playback.
1. Bring the Track In
Open the Show Editor (Cmd+1). At the bottom of the Parts rail, Import Audio as Part… brings the file in as a new Part, with its waveform on the timeline.
Look at the TC role chip beside the timecode readout. Master means CueSync is the show's clock; a new project on Theatre or Production starts that way. On a Part with audio in the Master role, Play runs the audio preview and the preview drives the show and the timecode CueSync sends. If the chip reads Follower ← ext TC, the show waits for an incoming clock instead; one tap flips it while the show is not playing.
Set the frame rate before you place a single cue. The frame rate selector on the Timecode screen (Cmd+0) sets the project and output rate together, and it must match the console. 25 fps is common in Europe and 30 or 29.97 in the US; take the rate from whoever owns the video if there is any.
2. Draft the Cues From the Track
CueSync reads the Part's audio for its phrases, energy and beat grid. Two tools turn that reading into cues:
- Generate Show Cues, at the end of the status line in the transport bar. It reads Analyzing … and stays greyed out until the audio is read. One click adds a cue at the start of every phrase and at the strong energy peaks, numbered on from the Part's last cue. Each is marked ✦ in the cue list, and one Cmd+Z removes the whole set.
- Suggest Cues (Cmd+Shift+S, or Suggest in the cue list toolbar) for more control. Pick the Source: At every phrase boundary, At downbeats every … bars, At energy peaks above …, At structural moments … or At silence sections …. Add a cue Template if you want every suggestion to carry the same action, and a Number prefix. Tick what you want and Add it in one undoable step, or Stage the suggestions as ghost markers and tap each one to accept it.
Bars are counted in the Part's own beat grid, three beats to a bar on a 3/4 grid. Nothing is written until you add it, and a drafted cue carries no action unless you chose a template.
3. Put Every Cue on the Beat
The Snap chips above the timeline (Off, Frame, Beat, Phrase, Cue) decide where a dragged cue lands. Choose Beat and every cue you drag lands on the Part's beat grid. If the Part has no beat grid yet, the chip says no grid rather than pretending to snap. Hold Option while dragging to place a cue freely.
For the fine work, select a cue and press the left or right arrow to nudge it by one frame, with Shift for one second. To move a group, select the cues and right-click one: Fire earlier 1 f, Fire later 1 f and Set offset… retime only the cues that fire on timecode, as one undo step.
You can also punch cues by ear. Set up capture slots on the capture toolbar, play the audio preview, and press a number key at each moment.
4. Decide How Each Cue Fires
Every cue has a position on the ruler. The Triggers tab of the Inspector decides how it fires:
| Mode | Fires when |
|---|---|
| Timecode | The clock reaches the cue. The default. |
| Manual | Someone presses GO. Use it where the stage has to be ready first. |
| Follow | A set time after the previous cue in the same lane fires. |
| Auto | Together with the previous cue in the same lane. |
This choice carries over to the console: only Timecode cues get a timecode event in the files CueSync writes for a desk.
5. Rehearse It Before the Desk Sees It
Set the rehearsal mode in the lane filter strip to DRY and play the Part. DRY advances the cues on the clock, runs timecode and executes control cues, but sends nothing to the rig, so a misplaced cue shows up while the console is still dark. REHEARSE+ rehearses with the outputs live.
6. Choose One Clock Owner
There are two ways to run the show on a console, and you use one of them per show, never both.
CueSync fires the cues. Give each cue an action for the desk (a grandMA3 sequence cue, an Eos cue, a MagicQ playback) and route the Part or lane to that output. The console does not need a timecode show of its own: CueSync sends each cue as the clock reaches it, and after a jump in the clock it replays the cues it skipped, in show order, so the desk ends on the right look.
The console chases the clock. The desk holds the cue list and fires it from its own timecode, and CueSync supplies both the list and the clock.
- grandMA3. Open File → Sync, Import & Export → Sync to GrandMA3…, read the preview and send the sequence. With the bridge plugin 1.7.0 or newer running on the desk, Send sequence + Timecode… sends the sequence and then the native MA3 Timecode object, and reports what the console holds. Without a network path, Export Timecode XML (USB)… writes the same object for a stick. Export after you sync, so the events point at the cue numbers the desk really has.
- ChamSys MagicQ, Hog 4, Avolites Titan. File → Sync, Import & Export → Export Desk Timecode CSV (MagicQ, Hog 4, Titan)… writes the Part as a marker file with frame times on the house clock. MagicQ imports it as timecode timings and Hog 4 as a new cuelist; on Titan it brings markers for placing triggers, not cues.
Either way, GO, standby and follow cues get no timecode event, and CueSync counts them in the export message. ETC Eos takes the cue list as USITT ASCII from Export Cue Sheet, but that format carries no timecode, so on Eos let CueSync fire the cues.
7. Send the Clock
On the Timecode screen, the output routing matrix lists every output that can carry timecode, and a new output starts with no route. For a grandMA3, switch on its row and pick the desk's timecode slot: CueSync positions and starts the slot when its clock starts or jumps, and pauses it when the clock stops. For any desk, the MTC, LTC and Art-Net timecode legs can feed the desk's timecode input. Then press Play.
Two checks before the doors open. At 23.976 and 29.97 fps a timecode label runs 3.6 seconds an hour behind real time, so compare one event late in the show with the desk. And on grandMA3, a Timecode file written for the wrong software release imports cleanly and fires nothing: check that every event row shows its cue.
Further Reading
- grandMA3 integration: live cues over OSC, Session Sync and the desk's timecode slots
- Timecode with CueSync: MTC, LTC, Art-Net timecode and TCNet out, and chasing a clock
- Show Editor in the manual and grandMA3 Session Sync
- Timecode calculator for frame and drop-frame arithmetic
- Plans and prices
grandMA3® is a registered trademark of MA Lighting International GmbH. CueSync is independent software and is not affiliated with or endorsed by MA Lighting.
Frequently Asked Questions
Can CueSync turn a song into a cue list automatically?
It drafts one. In the Show Editor, Generate Show Cues adds a cue at the start of every phrase and at the strong energy peaks of the Part's audio, and Suggest Cues lets you pick the source instead: phrase boundaries, downbeats every few bars, energy peaks, structural moments or silences. The drafted cues carry no actions unless you chose a template, so you decide what each one fires.
Which consoles can chase a timecode show built in CueSync?
grandMA3 gets the cue sequence through Session Sync and a native MA3 Timecode object, sent over the network when the bridge plugin 1.7.0 or newer runs on the desk, or carried on a USB stick. ChamSys MagicQ, Hog 4 and Avolites Titan import the Desk Timecode CSV CueSync exports; on Titan the file brings markers for placing triggers, not cues. Any console CueSync drives can also have its cues fired by CueSync on the show clock instead.
Is this the same as Generate Show in the DJ edition?
No. Generate Show (DJ and Production) builds a cue stack whose cues fire on the music, each on its own phrase of the track, whenever that phrase plays. A timecode show is built in the Show Editor (Theatre, Production and the Show Editor plan) and fires on the clock, at the same position every night.
Do GO cues end up on the console's timecode?
No. Only cues CueSync fires from timecode get a timecode event. GO, standby and follow cues are still cues in the desk's sequence, but they get no event, so the desk never fires them before the stage is ready. Fire those from the console.
Can I try this before I subscribe?
Yes. A free account can run the demo show and tour the app in read-only mode. Building and saving your own shows, and connecting real outputs, need a paid plan.
Do this with CueSync
CueSync fires your show's cues — lights, video, playback — from the music, a timecode or your GO, on the gear you already use.
- grandMA3 setup: Session Sync and live cues over OSC
- Timecode with CueSync: LTC, MTC, Art-Net and TCNet
Keep Reading
- Guides
How to Send Timecode to grandMA3: LTC, MTC and Art-Net
grandMA3 can follow SMPTE/LTC, MIDI timecode or Art-Net timecode. How each reaches the console, which to choose, and what happens when the source drops.
- Guides
grandMA3 Session Sync vs MSC and OSC for Theatre Calling
Move a Theatre cue list between CueSync and grandMA3 without re-storing looks, and choose when Session Sync, OSC or MIDI Show Control fits.
- Guides
23.976, 29.97 Drop-Frame, 25, 30 fps: Stop Timecode Drift
How 23.976, 29.97 drop-frame, 29.97 non-drop, 25 and 30 fps behave across LTC, MTC and Art-Net timecode, and how to stop drift on a live show.