Guides3 min read
Running a Scripted Show and a DJ Set from One Show File
Run a scripted cue list for Act One and a beat-driven DJ set for Act Two from one CueSync Production file, with clean hand-overs and fallbacks.
CueSync TeamShow Control Engineers
One Room, Two Completely Different Shows
Multipurpose venues, fashion runways, brand launches, cruise ships and festival mainstages rarely run one format all night. Doors and awards run to a stage manager's calling script or an LTC stripe from playback; ten minutes after the last speech, the podium clears and a resident or headline DJ plays a three-hour open-format set through the exact same grandMA3, Resolume, Pixera and QLab rig.
On separate software stacks, that change-over means quitting one show controller, re-binding UDP/OSC ports, hoping Art-Net priorities merge cleanly and losing unified panic control during the hand-over. CueSync Production keeps both engines in one .cuesync file over one connected output roster.
How Transport Arbitration Prevents Double-Firing
Inside one Production file, four engines share your outputs — Show Control (Show Editor + Run Mode), the Cues list, AutoPilot and Cue Pads. One transport rule keeps them from fighting over the rig:
| Theatre transport state | AutoPilot | Cues list music triggers (Beat, Phrase, Energy…) | Manual GO, MIDI & Cue Pads |
|---|---|---|---|
| Playing | Held in STANDBY ("Standing by — a timecode show is driving the console") | Suppressed; Scene Chains wait | Live |
| Paused | Released (fires if enabled and a track is playing) | Live | Live |
| Stopped | Released | Live | Live |
Two operational habits follow directly from that table:
- Keep AutoPilot toggled off until Act Two starts. If stage management pauses the Theatre transport during an intermission while walk-in music is playing on a deck, a pre-enabled AutoPilot is free to fire.
- Check both rehearsal switches before doors. Run Mode's DRY button and the Cues screen's DRY RUN button control the same underlying output gate — leaving either one active silences live output across the whole app.
Panic and Recovery Chords Across Both Acts
Whether you are in Run Mode or AutoPilot, four global chords behave predictably across the rig:
- Blackout (
Cmd+Shift+B) latches a full blackout across connected outputs, pauses AutoPilot, holds automatic Cues triggers, cancels active fades and holds Theatre timecode firing. PressingEscreleases it first from any screen. - Freeze (
Cmd+Shift+G) holds AutoPilot, automatic Cues triggers and the pixel wall frame while leaving Manual GO and Theatre cues live. - Manual Override (
Cmd+Shift+M) pauses AutoPilot alone so you can busk from pads or the Cues list; pressing Manual GO twice within three seconds also pauses AutoPilot automatically when Pause on Manual Go is enabled. - Resume All (
Cmd+Shift+R) clears Blackout, Freeze and Manual Override together and re-arms AutoPilot's fire plan.
The Five-Rung Live Fallback Ladder
Every hybrid night should carry a plain manual-GO backup cue list (every trigger set to Manual, starting with a 0.1 SAFE cue that puts every desk in a known state) so the operator can step down gracefully if an upstream feed fails:
- Rung 1 — Full automation: Act One on timecode, Act Two on PRO DJ LINK or Local Audio.
- Rung 2 — Same show file by hand: Engage Hold TC and call
Spacein Run Mode if external timecode drops; pause AutoPilot and play Cue Pads if a deck drops. - Rung 3 — Manual backup show on the primary Mac: Plain Cues list driving every output by hand with zero clock dependency.
- Rung 4 — Backup Mac takeover: Quit CueSync on the primary Mac (or wait out the unresponsive lease timeout on a solo plan; Team plans keep three live leases active), click Connect on the held-outputs banner on the rehearsed spare Mac, and fire
0.1 SAFE. - Rung 5 — Local console operators: Each department runs standalone from the sequences pushed earlier via Session Sync.
Further Reading
Frequently Asked Questions
Is there an automatic 'Act Two' button that flips from Theatre to DJ?
No, and intentionally so. CueSync gives you both engines in one .cuesync file and holds the DJ triggers back while the Theatre transport is Playing. At the transition you fire a known closing Theatre cue, double-press Stop in Run Mode, fire your opening DJ look cue or pad, and enable AutoPilot — an explicit operator hand-over nothing can trigger by accident.
What happens if a DJ powers on CDJs during Act One's timecoded show?
Two rules protect Act One. First, while the Theatre show is Playing, AutoPilot stays in STANDBY and automatic beat/phrase cues do not fire. Second, on the Timecode screen choose the Theatre priority preset before doors so MTC and LTC rank above CDJ timecode — otherwise an unpinned follower show would rank a newly detected deck first.
Why did pressing Space pause my music instead of firing GO?
Space is context-sensitive by screen: in Run Mode it fires the Theatre GO; in Show Editor it plays/pauses preview or DRY rehearsal (and is disabled in live SHOW mode); on Cues, Cue Pads and Home it fires the Cues-list GO unless a Local Audio track is active, in which case Space controls audio playback. When playing from Local Audio, trigger manual looks from Cue Pads or the on-screen GO button.
Can we run Theatre on FOH Mac #1 and DJ on Booth Mac #2 at the same time?
Yes, with a Team plan (which allows 3 registered devices and 3 simultaneous live output leases) or separate licences. A solo licence allows 2 registered Macs (primary and standby) with 1 live output lease at a time — quitting CueSync on the FOH Mac hands the live lease to the standby booth Mac.
How do I test a hybrid show file before going to the venue?
With a free account you can run the demo show and tour the app in read-only mode. Building and saving your own shows, and connecting real outputs, need a paid plan.
Keep Reading
- Guides
Which CueSync Edition Is Right for You? DJ, Theatre or Production
DJ, Theatre, or Production? A practical decision guide for choosing the CueSync edition that fits your workflow, venue size, and production complexity.
- Product
What's Inside CueSync Theatre & Production Editions?
A look inside CueSync Theatre and Production editions: the Show Editor timeline, timecode chase, the Companion crew board, Predictive Preview and Crowd.
- Guides
grandMA3 Session Sync vs MSC and OSC for Theatre Calling
Move a Theatre cue list between CueSync and grandMA3 without re-storing looks, and choose when Session Sync, OSC or MIDI Show Control fits.